If you acquired an outdated cooking area sporting avocado countertop in an age of black and chrome, you may have a burning desire to paint over the angering tiles. Before you paint, however, consider that tiles– with their smooth, glazed, easily washed surface areas– are created to shed dirt and spots. That means they are very good at shedding common paint too. Successful tile painting means thoroughly preparing the tile surface area so you can keep your new color in place.
Tidy
Get rid of whatever from the countertop and in the instant area around it.
Mix a percentage of mild meal soap and family ammonia with warm water. Wash the counter top’s entire surface area and backsplash. Use a sponge for surfaces, and a small scrub brush or toothbrush to actually clean up the grout and intricate locations around the sink.
Wash the countertop completely with tidy water and let it dry.
Analyze the countertop for stubborn spots or grease. Rewash if necessary to get all dirt, oil, and grime off the surface area. You need to have a definitely tidy surface area before painting.
Wash the surface area once again with a service of warm water and trisodium phosphate or regular household bleach if there are any indications of mold or mildew– particularly in the grout areas– and wash again. If there are no indications of fungi, you can skip this step.
Preparation
Sand the countertop gently with fine 400- to 600-grit sandpaper in a portable sanding block or orbital sander to simply scuff the tile surfaces and give them a little tooth to hold the paint.
Wash the countertop with clear water and let it dry, then use a tack cloth as a final preventative measure to remove all dust from the sanding.
Tape off all areas around the sink and walls behind the countertop that you do not want to paint using blue painter’s tape. For large locations like cabinet fronts, sink or walls, tape newspapers or pieces of plastic sheeting over them.
Prime and Paint
Brush or roll on a coat of light gray or off-white guide over the tile surface area, making sure to get into the grout areas as well. Use a guide developed for difficult surface areas like tile or glass.
Let the guide dry according to manufacturer’s directions prior to recoating, if required, for good coverage. Darker tiles may need more than one coat. Leave the primer to dry completely before applying the top coat of paint.
Use two coats of a good-quality oil-based paint in the color of your option utilizing a roller or soft brush. Again, permit appropriate drying time in between coats.
Tidy up brushes, rollers and any excess paint with mineral spirits.
Include a coat of clear urethane to the surface to solidify and seal it as an included protection. Let it dry. Do not use the countertop surface for at least 24 hr for the finest outcomes.
Things You Will Need
Moderate dish soap
Family ammonia
Sponge
Little scrub brush or toothbrush
Trisodium phosphate (TSP) or family bleach (optional).
Great sandpaper, 400- to 600-grit.
Sanding block or orbital sander.
Tack cloth.
Blue painter’s tape.
Newspapers or plastic sheeting.
Paint roller with a low nap.
Paint tray.
Paintbrush, wide with soft bristles.
Primer appropriate for tile, light gray or off-white.
Paint, oil-based.
Mineral spirits.
Clear urethane.
Pointer.
You can include ornamental touches like stenciling or hand-painted styles. Use oil-based paints over the guide and base paint coat before sealing with urethane.
Caution.
Constantly guarantee appropriate ventilation when dealing with oil-based paints and the solvents used for cleanup. If necessary, utilize a fan to assist flow air from smaller sized, open windows.
Tidy up spills from painted tile immediately to prevent staining and to prevent water damage to the underlying paint.
Do not utilize abrasive cleaners or scrub brushes on painted tile or you might trigger the paint to peel. Instead, utilize a damp sponge to clean the area regularly to prevent dirt and oil buildup.
Never mix ammonia with bleach when cleaning countertops.